How to paint a room

Step 1

Prepare the walls and ceiling . Use a stain-blocking primer to cover any dark mark you can't remove (stains, knots, ink, dark paint); otherwise, that area will bleed through. Never paint on wallpaper .

Step 2

Make sure there is adequate ventilation in the room.

Step 3

Plan on three coats: one coat of primer and two coats of finish. Always use primer on patched and unpainted surfaces; raw surfaces suck up paint like a sponge - or reject it.

Step 4

Paint into all the corners with a 2-inch or 3-inch paintbrush. Use the same brush to outline where the ceiling meets the wall (and vice versa), around doors and windows, above the baseboard and around any other trim or detailing - and wherever a paint roller won't fit.

Step 5

Pour some paint into the roller pan and roll away on the ceiling and then the walls. Pour only a small amount of paint in your roller pan - this will keep the paint from drying out before you can use it.

Step 6

Try to start rolling before the brushed-on paint has had time to dry, so that the rolled-on paint will blend in rather than become a second coat. Rolling out a W, about 3 feet wide, and then filling it in, assures an even application of paint. Get as close into the corners as you can without making a messy paint line.

Step 7

Paint from dry areas into wet. This will help reduce any paint ridges. Feather (thin out) all edges as you go, whether using a brush or a roller; this will also help reduce ridges.

Step 8

Cover cans or buckets when you're not using them. Keep a rag and brush handy to deal with drips, spills and the general messiness of the process. If a drip becomes too dry to spread out, let it dry. Come back later, sand it and paint over it.

to Prepare a Room for Painting, How to Use a Paint Spray Machine, How to paint, Do it yourself